WELCOME TO THE OFFICIAL WEBSITE OF HUIZHOU HICOOL CLIMATE EQUIPMENT CO., LTD
PRODUCTS
NEWS
CONTACT
TELEPHONE:0752-5313400(Home Sales), 5313858(Oversea Sales)
MOBILEPHONE:13502293103(Mr. Lei,Home Sales),13600105055(Mr. Li,Oversea Sales)
FAX:0752-5313133
Total product classification
Swimming Pool Heat Pump
CURRENT POSITION: HOME > ABOUT HEZHIBAO > Swimming Pool Heat Pump
Products in detail
Performance characteristics
1. The air source heat pump hot water machine is using the principle of reverse carnot cycle, use of heat pump system part of the electricity consumption transfers heat from the air to the water, to raise the temperature of the water to meet the conditions of use of equipment.
2. The product can effect comparing is high, the consumption of each 1 KW of power can produce 4 KW of heat, and the traditional electric water heater each consume 1 KW of power can only produce 0.95 KW heat, its economic benefits is 4 times more than traditional electric water heater, is coal and fuel oil (gas) furnace more than 2 times, compared with the solar water heater, the product is not limited by the installation conditions, and the limitation of the weather, rain or shine, can be used of the four seasons.5. Specially for the swimming pool heating air energy hot water units. Through special processing of the alloy is applied to make heat exchanger, the pool can be resistant to chlorine ion corrosion for a long time. According to the characteristics of strict pool environment on water temperature fluctuations, it adopts the design principle of large flow rate and small temperature difference, to a constant pool water temperature. We can also according to customer needs, make dehumidification function of cold recycling machine.
Scope of application
Is mainly suitable for families, hotels, restaurants, schools, hospitals, pools, bathing, large, high-grade office buildings and places of all need hot water.
Parameter
Parameter List of Swimming Pool Heat Pump
Model |
H-SP100T |
H-SP250T/3 |
H-SP500T/3 |
H-SP800T/3 |
H-SP120T/3 |
||
Heating Capacity |
kW |
10 |
25 |
50 |
80 |
120 |
|
Rated Input Power |
Heating |
kW |
1.95 |
5.06 |
10.12 |
16.3 |
24.4 |
Rated Input Current |
A |
9.7 |
9.8 |
19.6 |
31.4 |
47.6 |
|
Rated Water Output |
m³/h |
2.0-4.0 |
8.0-14.0 |
20.0-28.0 |
30.0-40.0 |
50.0-60.0 |
|
Power Supply |
220V/50Hz 1P |
380V/50Hz 3P |
|||||
Compressor Type |
Rotary |
Scroll |
|||||
Compressor Quantity |
Sets |
1 |
1 |
2 |
3 |
6 |
|
Fan Quantity |
Sets |
1 |
1 |
2 |
3 |
6 |
|
Refrigerant |
R410A |
||||||
Ambient Temperature |
-15℃~43℃ |
||||||
Control Manner |
Wire Control |
||||||
Protection |
High/low pressure protection, over-heat protection, over-current protection, water-break protection |
||||||
Noise |
dB(A) |
54 |
60 |
61 |
63 |
66 |
|
Water Gap Spec |
inches |
1" |
1-1/2" |
2" |
2" |
2" |
|
Net Dimension(LxHxW) |
mm |
855×680×720 |
955×680×720 |
1450×1320×840 |
2000×1800×1000 |
2600×1800×1000 |
|
Net Weight |
kg |
65 |
125 |
265 |
525 |
718 |
|
Packing Dimension(LxHxW) |
mm |
1020×720×760 |
1120×720×760 |
1600×1450×960 |
2100×1950×1220 |
2738×1950×1220 |
|
Gross Weight |
kg |
70 |
131 |
292 |
555 |
750 |
Note: 1. Rated heating capacity is tested under 24℃ ambient temperature
2. Return water temperature is 20℃
Performance characteristics
1. The air source heat pump hot water machine is using the principle of reverse carnot cycle, use of heat pump system part of the electricity consumption transfers heat from the air to the water, to raise the temperature of the water to meet the conditions of use of equipment.
2. The product can effect comparing is high, the consumption of each 1 KW of power can produce 4 KW of heat, and the traditional electric water heater each consume 1 KW of power can only produce 0.95 KW heat, its economic benefits is 4 times more than traditional electric water heater, is coal and fuel oil (gas) furnace more than 2 times, compared with the solar water heater, the product is not limited by the installation conditions, and the limitation of the weather, rain or shine, can be used of the four seasons.5. Specially for the swimming pool heating air energy hot water units. Through special processing of the alloy is applied to make heat exchanger, the pool can be resistant to chlorine ion corrosion for a long time. According to the characteristics of strict pool environment on water temperature fluctuations, it adopts the design principle of large flow rate and small temperature difference, to a constant pool water temperature. We can also according to customer needs, make dehumidification function of cold recycling machine.
Scope of application
Is mainly suitable for families, hotels, restaurants, schools, hospitals, pools, bathing, large, high-grade office buildings and places of all need hot water.
Parameter
Parameter List of Swimming Pool Heat Pump
Note: 1. Rated heating capacity is tested under 24℃ ambient temperature
2. Return water temperature is 20℃
RichScan
Thank you for your attention!
RichScan
Learn more!