WELCOME TO THE OFFICIAL WEBSITE OF HUIZHOU HICOOL CLIMATE EQUIPMENT CO., LTD
PRODUCTS
NEWS
CONTACT
TELEPHONE:0752-5313400(Home Sales), 5313858(Oversea Sales)
MOBILEPHONE:13502293103(Mr. Lei,Home Sales),13600105055(Mr. Li,Oversea Sales)
FAX:0752-5313133
Total product classification
Water Cooled Screw Type Chiller Unit
CURRENT POSITION: HOME > ABOUT HEZHIBAO > Water Cooled Screw Type Chiller Unit
Products in detail
1.The unit is a kind of central air conditioner which uses cooling water as cold source, water as cooling media to provide cooling capacity, the water is cooled down by cooling tower. The unit has many advantages, such as high efficiency, low noise, reasonable structure, simple operation, running safely, easy to install, etc.
2.The chiller unit can combine with fan coil, floor standing/ceiling type air handler, or fresh air units to form a semi-central air conditioning system, which has the advantages of fan coil system, such as flexible disposal, graceful appearance, saving architecture space, easy to adjust, can be turned on/off separately without influence on other rooms, low noise, etc.
3.The chiller unit provides cooling capacity through cooling tower, cooling pump and relative pipe work, make chilled water for air conditioning & industrial use. It has big cooling capacity, high energy
Application range
Widely applied to comfort central air conditioner system in public facilities, such as hotels, emporiums, office buildings, exhibition halls, air ports, gymnasiums, etc., can meet all kinds of requirements of electronic, pharmacy, biological, textile and other light industries, chemical, metallurgy, electric power or machinery industry.
Production line
Parameter
Parameter List of Water Cooled Screw Type Cold (Hot) Water Units
Model
H-Wch120
H-Wch340
H-Wch580
H-Wch890
H-Wch1030
Cooling Capacity
10³kcal/hr
119.0
335.5
571.3
879.0
1016.1
KW
138.3
390.1
664.4
1022.1
1181.5
Inout Power
KW
30.7
79.6
130.6
205.6
235.2
Operation Current
A
52.4
133.8
219.6
345.6
395.4
Compressor
Power Supply
380V/3N~50Hz
Energy Adjusting Range
Sectional or Unlimited Adjustment
Type
Screw Compressor
Quantity
1
1
1
2
2
Controller
Type
Fully Automatic Control
Protection
Hight/Low Pressure Protection;Freezing-Proof
Protection;Open Phrase/reverse Phrase Protection;Oll Pressure Protection;Over-Heat Protection
Evaporator
Type
Hight Effciency Shell And Tube Heat Exchanger
Water Pressure Drop
Kpa
45
60
65
65
65
Water Gap Spec
DN65
DN125
DN150
DN200
DN200
Water Flow
m³/h
17.5
80.8
114.3
175.8
203.2
Condenser
Type
Hight Effciency Shell And Tube Heat Exchanger
Water Pressure Drop
Kpa
50
67
70
72
75
Water Gap Spec
DN65
DN125
DN150
DN200
DN200
Water Flow
m³/h
21.5
80.8
136.7
211.2
243.7
Cold-Producing Medium
Type
R22/R407C
Dimension
Length
mm
2000
3100
3200
3100
3200
Width
mm
950
1300
1500
2000
2200
Height
mm
1200
1600
1700
2100
2200
Weight
Kg
760
1750
2500
3850
4620
Operation Weight
Kg
860
1920
2700
4150
5020
Note: Unit cooling capatity is decided according to the following conditions:
1.Chilled water inlet:12℃,chilled water outler:30℃,cooling water outlet:35℃
2.Water side dirt coeffcient:0.000086m2℃/KW.
3.Edvaporator/condenser water side rated pressurer:1.0MPa.
4.We can redesign for you if the above models can not reach your request.
Save & Reliable, Efficient & Environmental, Greative & Technoligical, Precise & Improving
1.The unit is a kind of central air conditioner which uses cooling water as cold source, water as cooling media to provide cooling capacity, the water is cooled down by cooling tower. The unit has many advantages, such as high efficiency, low noise, reasonable structure, simple operation, running safely, easy to install, etc.
2.The chiller unit can combine with fan coil, floor standing/ceiling type air handler, or fresh air units to form a semi-central air conditioning system, which has the advantages of fan coil system, such as flexible disposal, graceful appearance, saving architecture space, easy to adjust, can be turned on/off separately without influence on other rooms, low noise, etc.
3.The chiller unit provides cooling capacity through cooling tower, cooling pump and relative pipe work, make chilled water for air conditioning & industrial use. It has big cooling capacity, high energy
Application range
Widely applied to comfort central air conditioner system in public facilities, such as hotels, emporiums, office buildings, exhibition halls, air ports, gymnasiums, etc., can meet all kinds of requirements of electronic, pharmacy, biological, textile and other light industries, chemical, metallurgy, electric power or machinery industry.
Production line
Parameter
Parameter List of Water Cooled Screw Type Cold (Hot) Water Units
Note : Unit cooling capatity is decided according to the following conditions:
1.Chilled water inlet:12℃,chilled water outler:30℃,cooling water outlet:35℃
2.Water side dirt coeffcient:0.000086m2℃/KW.
3.Edvaporator/condenser water side rated pressurer:1.0MPa.
4.We can redesign for you if the above models can not reach your request.
Save & Reliable, Efficient & Environmental, Greative & Technoligical, Precise & Improving
RichScan
Thank you for your attention!
RichScan
Learn more!